12
9.
To re-install the appropriate Decora style insert, hold the Keypad Module chassis so that
it is facing you as shown in
Figure 11
. Fit the insert around the keys of the Keypad
Module. Align the pegs on the bottom of the insert with the corresponding holes on
the steel bracket of the Keypad Module. Fix the insert into place by carefully pressing
on the front of the insert. The pegs friction-fit into the holes and hold the insert in place.
NOTE
: Following all of these steps is only required for the Solo and Select Master Keypad
Modules. Numeric and Transport Accessory Keypad Modules only require that you determine
which color (white, bone or almond) Decora style insert is appropriate for your installation.
Follow Step 1 and Step 9 if you need to change the insert on an Accessory Keypad Module.
I
N T E L L I
P
A D
®
C
I
K
E Y P A D
M
O D U L E S
DS00266CCN-0 IntelliPad Ci.qxp 2/2/06 3:30 PM Page 14
