35
www.nilesaudio.com
Tv sETTINGs
This section is used to specify if your DMS4 Digital Music Server
is configured for PAL or NTSC use.
Fig. 7-5 DMS4 TV interface TV Settings screen (PAL/NTSC)
Note
: your DMS4 Digital Music Server will be set to
NTSC
by default. You may need to amend this setting if the TV user
interface is not displayed, or displayed incorrectly on your
television screen.
usER INTERFaCE sETTINGs
The options on this menu allow you to change the settings that
affect the way the user interface is displayed.
Fig. 7-6 DMS4 TV interface User Interface Settings screen
By default, your DMS4 Digital Music Server will be in
Passive
mode; changing to
Active
will add icons to the interface
depicting the available options on each screen.
This screen also allows you to enable or disable the hints that
appear at the bottom of some of the screens and the button
pulse when an option is selected.
In addition, you can also enable or disable
Auto Output.
This option dictates whether a remote control specifically
programmed to control a particular audio output will
automatically switch the DMS4 Digital Music Server to control
the assigned output when a button is pressed on the remote
control. For more information about using this feature, see the
section entitled
Remote Control Use in a Multi-room System
on
page 12.
The Screensaver
The DMS4 Digital Music Server is equipped with a screensaver
which will activate when the unit remains idle for a specified
period of time. On this screen, you may choose to disable the
screen saver or alter the time delay before it activates.
Note
: It is strongly recommended that you leave the screensaver
enabled if you are using a plasma or rear projection television
to display the user interface.
sYsTEm INFORmaTION
The
System Information
screen displays information about the
configuration of your DMS4 Digital Music Server, such as the
serial number and the version number of the software currently
running.
Fig. 7-7 DMS4 TV interface System Information screen
You may need to quote this information if you contact your
dealer or installer for technical support.
On this screen there is a also a
Reset System
option available
by pressing the
M
key on the remote control. Select this option
and press the
O
Reset Defaults
key to return your DMS4 Digital
Music Server to its default factory settings. You can also choose
the
M
Clear Content
option to remove all the music from your
Audio Library
.
If you choose to clear all the content from your
Audio Library
you will be asked to enter a password to confirm your action.
The password is
ResetMyMusic
.
Note
: If you perform either of the above two actions, you will
not be able to reverse their effects.
sOFTwaRE uPdaTE sETTINGs
In the unlikely event that a software update attempt fails, you
may need to amend these settings. If this scenario arises,
contact your dealer or installer for more information.
Fig. 7-8 DMS4 TV interface Software Update Settings screen
NETwORk BaCk uP sETTINGs
This screen allows you to specify
Username, Password
and
Network Location
for performing a Back Up operation.
