Outdoor installation
When installing the unit outside, the degree of storm protection must be assessed according to how exposed
the unit is - it is the responsibility of the installer that the unit is adequately secured.
Storm protection can be performed in several ways. In the following, some examples of storm protection are
shown.
Guylines can be mounted in the lifting eyes, which is attached securely to the ground.
It is possible to buy a storm bracket from Nilan, article number 77223. The
bracket attaches the unit together with the base.
a. Opel screws (6.3 x 19) with washer
Drill with 4.5 mm bit.
b. Storm bracket
c. Nilan base
d. Adjusting screws
e. Sylomer
Finally, brackets can be mounted on the feet with sylomer.
a. Nilan base
Drill with 4.5 mm bit.
b. Adjusting screws
c. Brackets
d. Sylomer
It should be noted here that there is air between the bracket and the feet /
sylomer. If this is NOT met, the vibration dampening effect of the sylomas will
no longer be present.
VPM 600-2200 (English)
BY NILAN
23