15
Setup Using the Connection Wizard
First-time setup can be completed with the help of the Connection Wizard.
Make sure the network is active before starting. To prevent changes to set-
tings from being lost should the camera monitor turn off automatically, use
the optional AC adapter or choose the maximum camera monitor off delay.
1
Turn the camera on.
2
Check that
Off
is selected for
Wireless LAN
>
Wireless LAN system
in the camera setup menu
(
24).
3
Select
PTP / IP
for
Wireless LAN
>
Mode
(
24).
4
In the top level of the wireless LAN menu, press the
button to start
the Connection Wizard. A list of available connections will be displayed.
Press the multi selector up or down to highlight the desired connection
and press the multi selector to the right to select it.
쐃
쐃 쐇
쐇 쐋
쐋
쐃
Selected connection is marked with
icon.
쐇
Infrastructure connections are marked with icon,
ad-hoc connections with
icon (
27).
쐋
SS-ID (not displayed if SS-ID is unavailable).
Connection Not Available
If the desired connection is not listed, press the
button to search again. If the
connection still can not be found, check settings on the network.
