Nikon SMZ1270, Instruction Manual

Page: 78 / 110

Chapter 5
Assembly
64
3
Assembly Procedures
The stereo microscopes SMZ800N/SMZ1270/SMZ1270i Zooming Bodies are the system microscopes that can be used in
various device configurations.
This chapter describes the basic device assembly procedures. See figures in Chapter 1, “Components” for basic
configuration examples. This chapter also describes the assembly procedures for various optional devices such as
illuminators that can be added to the basic configuration.
Before starting assembling, see “2 Device List” and check the devices to be used.
3.1
Assembly of the Basic System
1
Install a stand.
Install a stand on a flat and stable table or a working table in the position that has no influence from vibration.
See the instruction manual supplied with the following stands:

C-DS Dia Illumination Stand

C-LEDS Hybrid LED Stand

G-US1A Universal Table Clamp Stand

G-US2 Universal Table Stand

US-3 Universal Stand
 Support pillar attachment to the stand
[P-PS32 Plain Stand,
P-DSL32 LED Diascopic Illumination Stand,
P-DSF32 Fiber Diascopic Illumination Stand]
Attach a support pillar supplied with the stand to the stand.
The procedure for attaching the support pillar is the same
for all stand types.
Insert the support pillar to the stand and tighten the clamp
screw on the rear side using the hex driver supplied with
the support pillar (The hex driver is located at the top of
the support pillar).
MADE IN CHINA
Securely attaching the support pillar
C-EP Support
When attaching not the supplied support pillar, but a long-type C-EP Support, do it in the same way as instructed
above.
 Stage plate attachment
A transparent glass stage plate or acrylic stage plate is supplied with the stand in accordance with the types of
stands.
The acrylic stage plate has black and milky white surfaces. Attach the stage plate with the surface appropriate for
the sample up.
Glass stage plate handling precautions
Be very careful when handling the glass stage plate. Attach all other components before attaching the glass stage plate
in order to avoid the risk of breaking the glass during assembly.