Nikon SB-600 FSA03601, Repair Manual

Page: 18 / 69

FSA03601-R.3629.A
- A1・SB-600 -
・
While hooking the one part (slot side) of the
Xe band (#54) as shown left, attach the
Xe-K PCB. (Insert the terminal of the Xe-
tube into the hole of the Xe-K PCB.)
・
Hook the other part of the Xe band (#54) to
the A-side of the X-tube by following the
arrow.
#54
Xe-K PCB
Assembly
Lighting unit
・
Attach the conductive tape (#97) on the reflector
(#57).
・
Solder the wire (#WTRG2).
・
Attach the zoom brush (#71) on the reflector holder
(#56).
・
Attach the reflector (#57).
＊
Note: Check that the below 2 parts are hooked tightly.
・
Insert the Xe-tube (#XE701) in the direction of
the arrow.
#56
A-side of Xe-tube
#97
#57
#WTRG2
:WHITE
#71
#57
#XE701