12
En
Fr
Pt
Es
Target priority mode
This laser rangefinder employs the First Target Priority/Distant
Target Priority switching system (Factory default setting is
Distant Target Priority mode).
1. Turn on the power (Confirm the internal display is on).
2. Press and hold the MODE button, then depress and hold
the POWER ON/Measurement button within 0.5 second.
Continue to press and hold both buttons (more than
2 seconds) until First Target Priority mode and Distant
Target Priority mode are switched.
3. Release both buttons when the mode is switched.
* If the buttons are not pressed in the correct order,
switching will not take place.
* If switching fails to take place, repeat Step 2.
[First Target Priority mode/Distant Target Priority mode]
When measuring overlapping subjects, First Target Priority
mode displays the distance of the closest subject and
Distant Target Priority mode displays that of the farthest
subject.
First Target Priority mode
「
」
Distant Target Priority mode
「
」
Distance display units
Meter
[
]
Yard
[
]
Measurement results are displayed in yards/meters.
(Factory default setting is yard.)
1. Turn on the power (Confirm the internal display is
on).
2. Press and hold the MODE button for more than two
seconds. When the display unit has been switched,
release the button.
3. After the unit is set, results will be converted and
displayed in the selected distance display unit.
