manualshive.com logo in svg

Nikon LS-3500, Software Reference Manual

Share
Download
Nikon LS-3500 Software Reference Manual Download Page 63

Using the Windows Scanner Plugin

6-13

 Software Reference for Scanners

Defaults

Fig. 78

The Default Buttons

The 

Set Defaults

 button will save all the current dialog settings in the

PSTYLER.INI file to be used as the default for all following PhotoStyler sessions.

The 

Use Defaults

 button will revert all the dialog settings to those saved in

the PSTYLER.INI file.

Status Indicator

Fig. 79

Status Indicator

This dialog appears when a lengthy process is in progress. If progress

information is available, there is a display of percentage complete, otherwise, a
striped bar is drawn. If there is no way to cancel the operation, the cancel button is
disabled.

Fig. 80

Status Indicator With No Progress or Cancel

Messages include the current scanner condition and routine being performed.

For example, when the 

Autoexposure

 button is pressed, the message will read

Performing an Autoexposure

. The time bar allows you to see how far along the

routine is.

Summary of Contents for LS-3500
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands