manualshive.com logo in svg

Nikon LS-3500, Software Reference Manual

Share
Download
Nikon LS-3500 Software Reference Manual Download Page 39

Using The Macintosh Scanner Plugin

5-7

 Software Reference for Scanners

> Note

Although the ratio of scanned pixels to output halftone dots is traditionally
2:1, ratios as low as 1:1 can be acceptable in certain applications.  We
recommend 1.5:1 for most medium to high resolution four color offset
reproduction.

Fig. 31

Resolution and Size Controls

The crop will automatically resize itself as you do this, and you will end up

with the following display:

Fig. 32

Preview Window Crop

The scan pitch automatically changes to allow for the scan size requested.

You may now move the crop to cover any area of the preview that you wish

to scan by placing the crosshair cursor over the crop box, holding down the mouse
button and dragging the box to the new location.

If you now want to shrink or expand the crop while keeping the same output

resolution and size, you must check the 

File Size:

 checkbox.  You will now be

able to resize the crop without worrying about changing your output scan
parameters.

In the second example, select a crop in the preview area, and then make the

crop 8 inches wide at 300 dpi.  After that, make it 10 inches tall.  The important
thing is to get it wide enough to include the elements that you wish to see.

Summary of Contents for LS-3500
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands