manualshive.com logo in svg

Nikon LS-3500, Software Reference Manual

Share
Download
Nikon LS-3500 Software Reference Manual Download Page 27

Getting Started On The Macintosh

3-3

 Software Reference for Scanners

The quickest way to capture this image is to click the Preview button.

Fig. 11

Previewing an Image

In order to scan the slide under optimal conditions, the LS-3510AF will first

perform an autoexposure and autofocus sequence to determine information about
the nature of the image in the holder.

You should see the green Busy LED light up on the scanner and a message

appear in a small dialog.  The message should read 

Performing an

autoexposure...  

This status line will keep you informed about the scanner’s

progress.

When the green Busy LED on the LS-3510AF goes out, you have completed

the 

Autoexposure

 cycle and the scanner will automatically focus on the slide

displaying the message, 

Performing autofocus..

.  After this, the Busy LED will

immediately light up again and the scanner will begin the preview cycle as it reads
the picture directly to your monitor display, field by field. We can now see the
image appearing on the video screen in the scan window in the sequence red,
green, then blue screens.

>Note

You will not be able to see the high-quality color available from the scanner
unless you have a 24-bit display card installed in your system.  Using an 8-bit
card will display a dithered image.

Final Scan

The next step will be to perform the main scan at a higher resolution.  Crop

the preview image by placing the cursor at any corner of the preview, and dragging
to enclose the area of interest in a rectangle as in Fig. 12 below.

Fig. 12

Cropping the Preview Image

Summary of Contents for LS-3500
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands