manualshive.com logo in svg

Nikon ECLIPSE T-17-369, Instruction Manual

Share
Download
Nikon ECLIPSE T-17-369 Instruction Manual Download Page 171

Chapter 7    Assembly of the Devices 

151 

 7.10    Attaching an Analyzer and a Polarizer (Required for DIC 

Microscopy) 

 7.10.1  Attaching 

an 

Analyzer 

Attach an analyzer to the microscope main body. 

Alternatively, an analyzer cube can be attached to the FL turret.   
The attachment procedure for analyzer cubes is the same for fluorescent filter cubes. For details, see “7.5.2 
Mounting a Filter Cube.” 

 

1. 

Remove the dust-proof slider from the 
microscope main body. 

2. 

Insert the TI2-C-DICA analyzer. 

The analyzer slider can be inserted from both 
sides of the microscope main body. 
Setting the slider to second click position will 
place the analyzer into the optical path. 
Returning to the first click position will remove 
the analyzer from the optical path, with a hollow 
hole placed in the optical path instead. 

   

 

 

 

 

Analyzer slider

Analyzer slot

Summary of Contents for ECLIPSE T-17-369












































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands