manualshive.com logo in svg

Nikon ECLIPSE T-17-369, Instruction Manual

Share
Download
Nikon ECLIPSE T-17-369 Instruction Manual Download Page 160

Chapter 7    Assembly of the Devices 

140 

Using a TC-S-HM middle handle 

Six M4 set screws are supplied with the middle handle. (Tool: 2 mm hexagonal screwdriver, supplied with the 
microscope main body) 

1. 

Remove each of the middle handle parts by 
turning them, and divide them into three 
parts. 

 

 

 

Part A 

Part B 

Part C 

2. 

Place the stage with its top surface facing 
downward while making sure that the top 
surface is not damaged. 

3. 

Screw in part A to the handle mount while 
firmly holding the handle mount by one 
hand. 

4. 

Firmly affix the attached part A using the 
two M4 set screws. 

Attach a set screw to the tip of the hexagonal 
screwdriver and screw it into each hole (2 in 
total) at the lower part of the side of part A to 
affix it. 

5. 

Cover part A with part B and screw it in. 

When screwing in, use one hand to firmly hold 
the root of the handle mount. 

6. 

Firmly affix part B using two M4 set screws. 

Affix a set screw to the tip of the hexagonal 
screwdriver and screw it into each hole (2 in 
total) at the lower part of the side of part B. 

 

 

 

Attaching parts A and B 

7. 

While using a hexagonal screwdriver to 
keep part A from turning, screw in part C, 
and then firmly affix it using set screws. 

 

  Notes on mounting 

When screwing in part C, make sure to keep part 
A from turning using a hexagonal screwdriver to 
avoid co-rotation. If part C is screwed in while part 
A is free to rotate, the rack of the stage might be 
damaged. 

 

1) Insert the hexagonal screwdriver into a hole 

on the side of part B, and with the screwdriv-
er pressed in lightly, turn part A inside. When 
the hexagonal screwdriver reaches the posi-
tion of the hole on part A, insert the screw-
driver further. 

2) While keeping the hexagonal screwdriver 

inserted into the hole, screw in part C to part 
A. 

3) Affix a set screw to the tip of the hexagonal 

screwdriver and screw it into each hole (2 in 
total) on the side of part C. 

8. 

Mount the manual stage on the microscope 
main body (See §7.7.1.) 

   

 

 

 

 

 

 

 

 

Attaching part C 

 

Stage

Handle mount 

7.

-1) Insert 

a 

hexagonal 

screwdriver to 

keep it from 

turning. 

7.

-2) Screw 

in 

part C. 

6.

 Fix 

with 

set 

screws (M4, x 2). 

3.

 Screw in part A. 

4.

 Fix 

with 

set 

screws (M4, x 2). 

5.

 Screw in part B. 

 

Hexagonal screwdriver 

Hole on part

Hole on part

7.

-3) Fix 

with 

set screws 

(M4, x 2). 

Summary of Contents for ECLIPSE T-17-369












































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands