Chapter 4 Microscopy Procedure (Detailed)
21
4
15
Turn off the power switch.
(1) Press the power switch to the “
○
”
position.
Power of the microscope will turn off and the
lamp will go out.
(2) Open the claw of the specimen holder
with your finger at the root or the tip tilt
and remove the specimen slide.
This completes the microscopy procedure.
When storing the microscope:
•
Unplug the power cord.
•
Before storing the microscope, wait approximately 30 minutes after turning off the lamp, and
make sure that the field lens unit has cooled sufficiently.
•
Return the binocular part to its lowest position.
•
Cover the microscope with the vinyl dust cover. (Before covering the microscope, wait
approximately 30 minutes after turning off the lamp, and make sure that the field lens unit has
cooled sufficiently.)
•
When carrying the microscope, hold it at its upper rear and lower front ends.
Power OFF
(2)
(1)
Summary of Contents for ECLIPSE E200 MV Series
Page 1: ...Microscope ECLIPSE E200 MV Series E200LED MV Series Instructions M588E 11 10 NC 1 1 2 ...
Page 2: ......
Page 13: ......
