Nikon D7200, User Manual

Page: 149 / 423

125
3
Select a preset.
Press the
L
(
U
) button and rotate the sub-command dial
until the desired white balance preset (d-1 to d-6) is displayed
in the monitor.
4
Select direct measurement mode.
Release the
L
(
U
) button briefly
and then press the button until the
L
icon in the monitor starts to flash.
A spot white balance target (
r
) will
be displayed at the selected focus
point.
5
Position the target over a white or grey area.
While L flashes in the display, use
the multi selector to position the
r
over a white or grey area of the
subject. To zoom the area around the
target in for more precise positioning,
press the
X
(
T
) button.
L ( U ) button Sub-command
dial
Monitor
Monitor