Nikon D7200, User Manual

Page: 146 / 423

122
4
Select direct measurement mode.
Release the
L
(
U
) button briefly
and then press the button until
D
starts to flash in the control panel
and viewfinder.
5
Measure white balance.
In the few seconds before the
indicators stop flashing, frame the
reference object so that it fills the
viewfinder and press the shutter-release button all the way
down. The camera will measure a value for white balance and
store it in the preset selected in Step 3. No photograph will
be recorded; white balance can be measured accurately even
when the camera is not in focus.
A
Protected Presets
If the current preset is protected (
0
129),
3
or Prt will flash in the
control panel, viewfinder, and information display if you attempt to
measure a new value.
Control panel
Viewfinder