Nikon D7200 User Manual Download

Page: 119 / 423

Recompose the photograph and shoot.

Focus will remain locked between shots if you
keep the shutter-release button pressed halfway
(

AF-S

and live view) or keep the

AE-L/AF-L

button

pressed, allowing several photographs in succession to be
taken at the same focus setting.

Do not change the distance between the camera and the
subject while focus lock is in effect. If the subject moves, focus
again at the new distance.

Viewfinder photography

Live view

See Also

Pressing the

AE-L/AF-L

button in Step 2 also locks exposure (

107).

See Custom Setting f4 (

Assign AE-L/AF-L button

285) for

information on choosing the role played by the

AE-L/AF-L

button.

Summary of Contents for D7200








































































































































































































































































































































































































































Search results

Summary of Contents for D7200

Reviews:

Related manuals for D7200

Brands by name

Popular brands

Nikon D7200, User Manual

Search results

Summary of Contents for D7200

Reviews:

Related manuals for D7200

Brands by name

Popular brands