- M2
･
-
VBA12001-R.3668.A
Autofocus
TTL phase detection by Nikon Multi-CAM900 autofocus module
with AF-assist illuminator (range approximately 0.5–3.0 m / 1´8″–
9´10″)
Detection range
–1 – +19 EV (ISO 100 at 20 °C/68 °F)
AF-area mode
Single-area AF, dynamic-area AF, dynamic-area AF with closest
subject priority
Focus lock
Focus can be locked by pressing shutter-release button halfway
(single-servo AF) or by pressing AE-L/AF-L button
Exposure
Metering
Three-mode through-the-lens (TTL) exposure metering
Matrix
3D color matrix metering II (type G and D lenses); color matrix
metering II (other CPU lenses); metering performed by 420-
segment RGB sensor
Center-weighted
Weight of 75% given to 6, 8, 10, or 12-mm circle in center of
frame
Spot
Meters 3.5-mm circle (about 2.5% of frame) centered on active
focus area
Range
(ISO 100 equivalent, f/1.4 lens,
20 °C/68 °F)
0 – 20 EV (3D color matrix or center-weighted metering)
2 – 20 EV (spot metering)
Exposure meter coupling
CPU coupling
Exposure control
Operating mode
Digital Vari-Program
（
auto,
portrait, landscape,
Child,
close up, sports, night portrait)
,
programmed auto (
P
) with flexible program; shutter-priority
auto (
S
); aperture priority auto (
A
); manual (
M
)
Exposure compensation
–5 – +5 EV in increments of
1
/
3
or 1⁄2 EV
Bracketing
Exposure and / or flash bracketing (up to
±
2EV over 3
exposures)
Exposure lock
Luminosity locked at detected value with AE-L/AF-L button
Shutter
Combined mechanical and CCD electronic shutter
Speed
30 –
1
/
4000
s in steps of
1
/
3
or 1⁄2 EV, bulb, remote
Sensitivity
200 – 1600 (ISO equivalent) in steps of
1
/
3
EV
White balance
Auto (TTL white-balance with 420 pixels RGB sensor), six
manual modes with preset white balance
Bracketing
3 exposures in increments of 1, 2, or 3