Nikon D5 Professional User Manual Download

Page: 476 / 512

452

Error Messages

This section lists the indicators and error messages that appear in
the viewfinder, top control panel, and monitor.

Indicator

Problem

Solution

Control

panel

View-

finder

(flashes)

Lens aperture ring is
not set to minimum
aperture.

Set ring to minimum
aperture (highest
f-number).

Low battery.

Ready a fully-charged
spare battery.

(flashes)

• Battery exhausted.

• Recharge or replace

battery.

xx, 1 9,

22 , 424

• Battery can not be

used.

• Contact Nikon-

authorized service
representative.

• An extremely

exhausted
rechargeable Li-ion
battery or a third-
party battery is
inserted in the
camera.

• Replace the battery,

or recharge the
battery if the
rechargeable Li-ion
battery is exhausted.

• High battery

temperature.

• Remove battery and

wait for it to cool.

—

(flashes)

—

Camera clock is not set. Set camera clock.

No lens attached, or
non-CPU lens attached
without specifying
maximum aperture.
Aperture shown in
stops from maximum
aperture.

Aperture value will be
displayed if maximum
aperture is specified.

241

Summary of Contents for D5 Professional

































































































































































































































































































































































































































































































































Search results

Summary of Contents for D5 Professional

Reviews:

Related manuals for D5 Professional

Brands by name

Popular brands

Nikon D5 Professional, User Manual

Search results

Summary of Contents for D5 Professional

Reviews:

Related manuals for D5 Professional

Brands by name

Popular brands