Nikon COOLPIX P330, Quick Start Manual

Page: 249 / 289

E
92
Error Messages
Re
fe
re
nce
S
e
ct
io
n
Image cannot be
modified.
Cannot edit selected picture.
• Confirm the conditions that are required for editing.
•
RAW processing cannot be performed for RAW (NRW) images
that were taken with cameras other than the COOLPIX P330.
• These options cannot be used with movies.
E
11
–
–
Cannot record movie.
Time out error while recording movie.
Choose a memory card with a faster write speed.
17
Cannot reset file
numbering.
No more folders can be created.
Insert a new memory card, or format the internal memory/
memory card.
16,
E
79
Memory contains no
images.
No pictures in the internal memory or memory card.
• To view the pictures stored in the internal memory, remove
the memory card.
• To copy pictures from internal memory to a memory card,
press the
d
button and select Copy from the playback
menu.
17
E
61
File contains no
image data.
File not created with the COOLPIX P330.
File cannot be viewed on this camera.
View file using the computer or any other devices which was
used to create or edit this file.
–
This file cannot be
played back.
All images are hidden. No images available for a slide show. –
This image cannot be
deleted. Picture is protected.
Disable protection.
E
59
Travel destination is in
the current time zone.
Destination in same time zone as home. –
Mode dial is not in
the proper position. Mode dial is between two modes.
Rotate the mode dial to select the desired mode.
22
Raise the flash.
• When the scene mode is Scene auto selector , you can take
a picture even if the flash is lowered but the flash will not fire.
• When the scene mode is Night portrait or Backlighting
with HDR set to Off , you must raise the flash to take a
picture.
34
36, 39
Lens error
Lens error occurred.
Turn the camera off and then on again. If the error persists,
contact retailer or Nikon-authorized service representative.
19
Communications
error Error occurred during communication with printer.
Turn off camera and reconnect the USB cable.
E
20
System error
Error has occurred in camera’s internal circuitry.
Turn off camera, remove and reinsert battery, and turn on
camera. If the error persists, contact retailer or Nikon-authorized
service representative.
19
Display Cause/Solution
A