Nikon COOLPIX L610, Quick Start Manual

Page: 260 / 300

E
101
Re
fere
nce
S
ecti
o
n
Failed to save 3D image
The camera failed to save the 3D image.
•
Try shooting again.
•
Delete images.
•
3D images may not be able to be created and saved
depending on the shooting conditions, such as when the
subject is moving, dark, or low in contrast.
44
32
–
Lens error
Lens is not operating properly.
Turn camera off and then on again. If error persists, contact
retailer or Nikon-authorized service representative.
22
Communications error
Error occurred during communication with printer.
Turn camera off and reconnect USB cable.
E
30
System error
Error has occurred in camera’s internal circuitry.
Turn camera off, remove and reinsert batteries, and turn
camera on. If error persists, contact retailer or Nikon-
authorized service representative.
14, 23
Printer error: check
printer status.
Printer error.
Check printer. After solving the problem, select
Resume and
then press the
k
button to resume printing.*
–
Printer error: check
paper
Specified size of paper is not loaded in printer.
Load the specified size of paper, select
Resume , and then
press the
k
button to resume printing.*
–
Printer error: paper jam
Paper has jammed in printer.
Remove the jammed paper, select
Resume , and then press
the
k
button to resume printing.*
–
Printer error: out of
paper
No paper is loaded in printer.
Load the specified size of paper, select
Resume , and then
press the
k
button to resume printing.*
–
Display Cause/Solution
A