Nikon COOLPIX 5400 Repair Manual Download Page 6

Page: 6 / 67

8##4#

- D1

㨯

E5400 -

DISASSEMBLY

ޓޓ

Notes:

Remove the CF card and battery prior to disassembly.

During disassembly, make a note of the routing of the cords, which screws are

mounted in which parts, etc.

Electrical parts must be grounded since they are easily damaged by static.

Notes for the product in which the lead-free solder is used

• Lead-free solder is used in this product.
• When you perform soldering, special solder and special soldering iron are

necessary.

• Don' mix the lead-free solder with the conventional solder.
• The solder and soldering iron exclusively for this product cannot be used for

others.

WARNING

There are high voltege parts inside. Be careful of this electric shock,
when you remove the cover.

You must discharge the main condenser according to the instruction
of this repair manual before you remove the cover.

Summary of Contents for COOLPIX 5400




































































Search results

Summary of Contents for COOLPIX 5400

Reviews:

Related manuals for COOLPIX 5400

Brands by name

Popular brands

Nikon COOLPIX 5400, Repair Manual

Search results

Summary of Contents for COOLPIX 5400

Reviews:

Related manuals for COOLPIX 5400

Brands by name

Popular brands