manualshive.com logo in svg

Nikon COOLPIX 5400, Repair Manual

Share
Download
Nikon COOLPIX 5400 Repair Manual Download Page 32

VAA14001-R.3603.A

- A18

･

E5400 -

14.  USB Storage Information Registration

USB storage data are important when the camera is connected to a computer via a USB connection.
If there are any errors in the USB storage data, or if it has not been saved, the USB specification conditions will not 
be satisfied, so always check and save the USB storage data.
[Adjustment method]

1.  Connect the camera to the personal computer.
2.  Double-click “DscCalDi130a”.
3.  Click the Get button in the USB storage window and check the USB storage data.
   VID: NIKON
   PID: NIKON DSC E5400
   Serial:
   Rev.: 1.00
4.  Check the “Serial” in the above USB storage data.  If the displayed value is different from the serial number 

printed on the base of camera, enter the number on the base of camera.  Then click the Set button.

5.  Next, check VID and Rev. entries in the USB storage data.  If any of them are different from the values in 

“3.” above, make the changes and then click the corresponding Set button.

Summary of Contents for COOLPIX 5400




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands