107
T
echnical Notes
Display
Problem
Solution
COMMUNICATIONS
ERROR
• PictureProject is not run-
ning.
• USB cable disconnected
or memory card removed
while pictures are being
transferred to computer.
• USB option set incorrectly.
• Start PictureProject before
pressing center of multi se-
lector.
• If error appears in computer
monitor, click
OK
to exit
PictureProject. Turn cam-
era off, reconnect cable or
replace memory card, then
turn camera on and transfer
pictures.
• Turn camera off and discon-
nect cable, then choose new
USB setting in camera setup
menu and reconnect cam-
era. If error persists, use
Transfer
button in Picture
Project to transfer pictures.
—
53–56
53
NO IMAGES ARE
MARKED FOR
TRANSFER
No pictures selected for
transfer when center of
multi selector pressed to
transfer pictures to com-
puter.
Disconnect camera and select
at least one picture for trans-
fer, then begin transfer again.
53, 83
SYSTEM ERROR
Error has occurred in cam-
era’s internal circuitry.
Turn camera off, unplug op-
tional AC adapter (if using),
remove and reinsert batteries,
and turn camera on. If error
persists, contact retailer or
Nikon representative.
8–9
LENS ERROR
Error has occurred during
lens operation.
Turn camera off and then on
again. If error persists, con-
tact retailer or Nikon repre-
sentative.
—