JAA79351-R.3670.A
- A42 ･ AF-S DX55-200/4-5.6G -
�
Make this inspection on both focal length 55mm (W) and 200mm (T).
(3) Inspection of lens-servo stop accuracy
Fig.2
Note:
The value of "ADUST DELAY-TIME" is set by the adjustment software. So, if the lens does not
stop during the inspection of "LENS DRIVING STOP ACCURACY", any value can be input without
problem.
However, the larger the value of "ADJUST DELAY-TIME" gets, the longer the inspection time becomes.
△（
Revision
）
△（
Revision
）
Lens inclination
Position of index window
Horizontal
Up, right and left
Front lens group 60° angle upward
Front lens group 60° angle downward
(Lens position in inspecting)
△（
Addition
）
△（
Revision
）
Changed page
△
×8
△（
Deletion
）
△（
Deletion
）
�
If the lens stops while inspecting the lens-servo stop accuracy, input a figure in "Delay time" of the
below "Fig.2", from "0" to "1000" for the delay time (msec: millisecond) which prevents stopping
the lens.
△（
Addition
）
△（
Addition
）
This inspection must be made at the following 5 lens positions with the focal length
[both 55 mm (W) and 200 mm (T)].
Tick the checkbox, when
the front lens-G is tilted
at 60°angle upward or
downward.
Input box
December. 19. 2006
INC
