73
n
Not available if Eye-Fi card is
locked
(
/
k
(blinks)
Eye-Fi card is locked (write protected). Slide card write-
protect switch to “write” position.
This card is not formatted.
Format the card.
T
(blinks)
Format card or turn camera off and insert new memory
card.
Card is full
j
/
A
/
s
(blinks)
•
Reduce quality or size.
•
Delete photographs.
•
Insert new memory card.
—
●
(blinks)
Camera can not focus using autofocus. Change
composition or focus manually.
Subject is too bright
s
(blinks)
•
Use a lower ISO sensitivity.
•
Use commercial ND filter.
•
In mode:
S
Increase shutter speed
A
Choose a smaller aperture (larger f-number)
%
Choose another shooting mode
Subject is too dark
•
Use a higher ISO sensitivity.
•
Use flash.
•
In mode:
S
Lower shutter speed
A
Choose a larger aperture (smaller f-number)
No Bulb in S mode
A
(blinks)
Change shutter speed or select manual exposure mode.
No Bulb in HDR mode
A
(blinks)
Change shutter speed.
Interval timer shooting
—
Menus and playback are not available while interval timer
photography is in progress.
Turn camera off.
—
N
(blinks)
Flash has fired at full power. Check photo in monitor; if
underexposed, adjust settings and try again.
Flash is in TTL mode. Choose
another setting or use a CPU
lens.
Change flash mode setting on optional flash unit or use
CPU lens.
—
N
/
s
(blinks)
•
Use the flash.
•
Change distance to subject, aperture, flash range, or
ISO sensitivity.
•
Lens focal length is less than 18 mm: use a longer focal
length.
•
Optional SB-400 flash unit attached: flash is in bounce
position or focus distance is very short. Continue
shooting; if necessary, increase focus distance to
prevent shadows from appearing in photograph.
Indicator
Solution
Monitor
Viewfinder
