92
n
This section lists the error messages that appear in the display.
Error Messages
Message
Solution
(Shutter-speed or
aperture display flashes)
If the subject is too bright, lower ISO sensitivity
or choose a faster shutter speed or smaller
aperture (higher f-number).
If the subject is too dark, raise ISO sensitivity,
use the flash, or choose a slower shutter speed
or larger aperture (lower f-number).
Keeping the zoom ring
button pressed, rotate
the zoom ring to extend
the lens.
A lens with a retractable lens barrel button is
attached with the lens barrel retracted. Keep-
ing the retractable lens barrel button pressed,
rotate the zoom ring to extend the lens.
Check lens. Pictures can
only be taken when a
lens is attached.
Attach a lens.
Start-up error. Turn the
camera off and then on
again.
Turn the camera off, remove and replace the
battery, and then turn the camera on.
The clock has been
reset.
Set the camera clock.
No memory card.
Turn the camera off and confirm that the card
is correctly inserted.
This memory card
cannot be used. Card
may be damaged; insert
a different card.
•
Use an approved card.
•
Format the card. If the problem persists, the
card may be damaged. Contact a Nikon-
authorized service representative.
•
Insert a new memory card.
This memory card is not
formatted. Format the
memory card?
Select
Yes
to format the card, or turn the cam-
era off and insert another memory card.
