3
Important notice
The presence detectors Swiss Garde 360 Presence KNX UP
is suitable for ceiling mounting indoors only (IP20, class II).
In case of errors such as continuous light, uncontrolled
switching, etc., please consult page 7 „troubleshooting“.
Function
The presence detector Swiss Garde 360 Presence KNX UP
reacts to heat radiation of moving bodies. A person
approaching the monitored area automatically triggers the
connected light. If no motion is detected again, the light will
automatically switch off after a delay time configured in ETS.
In case of activated standby, the light will stay on at reduced
intensity during the set time period (mode
dimming
complete/ constant light control
).
Installation
Connect the presence detector as follows:
red wire
(+)
to be connected to red terminal
black wire (-)
to be connected to grey terminal
Application notes
A detailed description of the communication objects and all
parametrizable functions can be found in the following
separate document:
Swiss Garde 360 Presence KNX UP
APPLICATION NOTES
3
