Niko Swiss Garde 360 Presence KNX UP Instruction Manual Download Page 5

Page: 5 / 8

The PIR sensors 1 2 3 4 can be activated via ETS individually

or in groups, using the above numbering scheme.

After KNX/EIB bus connection: the detector takes

approx. 1 min. to reach a stable working condition!

LED

green

Flashes with each detection

LED

red programming

glows upon pressing the

programming button

PIR sensors numbering

Summary of Contents for Swiss Garde 360 Presence KNX UP

Page 1: ...ce KNX UP Item no Model EAN 351 25031 SG360P KNX UP 3505100250319 25020N SG360P KNX UP 3505100250203 nv Niko sa Industriepark West 40 9100 Sint Niklaas Belgium www niko eu 32 3 778 90 80 support niko eu Edition 09 2022 Art Nr 25020N 351 25031 ...

Page 4: ...SG360P KNX UP 351 25031 25020N frontal view rear view 4 bus terminal grey bus terminal red rating plate programming button ...

Page 5: ... in groups using the above numbering scheme After KNX EIB bus connection the detector takes approx 1 min to reach a stable working condition 5 LED green Flashes with each detection LED red programming glows upon pressing the programming button PIR sensors numbering ...

Page 7: ... for OFF without reason or potential causes of false light never turns OFF triggering animals heating etc may all doing faulty switching check distances to lamps heat reflection or direct light influence detector is to sensitive reduce the detection range sensitivity 1 10 via ETS Turns the ON during day twilight adjustment set to high time set to a lower value via ETS menu light ...