25
EN
350-20056
Read the complete user manual before carrying out the installation and activating the system.
1. DESCRIPTION
The presence detector for flush mounting in a ceiling uses
Passive Infrared Technology
(PIR) and is suitable for
indoor
use
. Lighting control through motion detection is useful for small offices, offices separated into islands and storage areas.
The
IR remote control
(not included) (350-20057) can be used to adjust the basic settings as well as additional settings
for the presence detector (see section 3.2.).
2. INSTALLATION
2.1. Positioning
The presence detector reacts to motion and heat in its environment.
Installation tips:
- The recommended mounting height is 2 to 3 m. At a height of 2.5 m, the presence detector has a detection range of 7 m
and a detection angle of 360° (fig. 1).
- Do not install the presence detector near moving objects, heat sources (such as cookers and electric heaters) or air currents
(fig. 2). This can result in undesired activation of the presence detector.
- Do not position the presence detector towards the light source it is meant to activate if application 1 and 2 are used.
Attention:
Disconnect all power before installing the presence detector. Do not connect the device to the mains voltage until
installation is completed.
2.2. Mounting
Mounting and connecting the presence detector
The presence detector is suitable for mounting in a Niko mounting box (not included) (390-20056) or a flush-mounting
box with a screw fixing diameter of 60 or 55 mm.
Follow the instructions in figure 3 to install the presence detector.
Connect the sensor (fig. 4.1).
Connect a push button if manual operation of the presence detector is also desired (fig. 4.2).