![background image](http://html1.mh-extra.com/html/niko/10-512/10-512_manual_1689542046.webp)
46
10-512
EN
Step 5:
Exit the internal unit’s programming mode
Briefly press function key 3 of the basic module to exit the internal unit’s programming mode. The
first 7 indication LEDs go out.
* Note:
Before programming this function, first assign an external unit address to the
external unit(s) and block it using the service set 10-870 (*76 # serial number (external
unit) # external unit address #)
**
You can also carry out Step2 using the service set 10-870:
Programming function
Step2:
carrying out a bus action using the service set.
Selection external unit and door
opener relay
- Inserting external unit address
- briefly press the key for speech connection of the service
set 2x
address …
…
Internal call
* 30 # serial number (internal unit to be called) # 0 #
Displaying the status of the indica-
tor function via an indication LED.
* 30 # serial number (bus indicator module) # 0 #
Reroute function
* 30 # serial number (internal unit reroute function) # 0 #
4. PRoDUCt MaINtENaNCE
By means of the following maintenance tips we want to ensure that the surfaces of these
products are not damaged by improper use. Damage by improper use is not covered by
the guarantee.
Maintenance tips
- It is sufficient to clean the products with soap and a damp cloth.
- You are strongly advised not to use any of the following:
- abrasive sponges or abrasive detergents
- maintenance products containing solvents or acids, or cleaning products containing
acetic acid
- high pressure cleaner.