
65
05-711
2. Press input 2 for 3s. The connected load first dims to the previous
set light atmosphere and after 3s to the desired light atmosphere.
You can at any time retrieve a light atmosphere by pressing input 2. To
exit the light atmosphere and switch off the load, press input 1.
With 1-button operation, you can simultaneously retrieve the light
atmospheres of different light circuits. To this end, connect terminals
2 and COM of the dimmers that control the different light circuits
(see fig.5).
After a voltage interruption the analog control will be switched on again
at the previous value.
You can connect multiple operating points with N.O. contacts (not
illuminated). You can connect a max. of 30 N.O. contacts (170-00000)
in parallel. The max. distance is 100m.
Operation of input 3 (connection terminals: COM terminal and
terminal 3):
Panic function (see 4.B)
Mode 3: ‘2’-button operation
In 2-button mode, input 1 (connection terminals, COM terminal and
terminal 1) and input 2 (connection terminals, COM terminal and
terminal 2) together function as 2-button operation (see fig.2). Input 3
allows the panic function to be activated (see 4.B).
In 2-button mode, the default setting of the analog control is with
memory function:
EN
Summary of Contents for 05-711
Page 109: ...109 05 711 fig 1 05 711TG001 N L 230V N L N N L L 1 10V 1 10V max 30 0 170 0000X...
Page 111: ...111 05 711 N L 230V N L N N L L 1 10V 1 10V fig 3 05 711TG004...
Page 114: ...114 05 711 fig 6 05 711TG007 N L 230V N L N N L L 0 170 00000 05321 1 10V 1 10V max 30...
Page 115: ...115 05 711...