English
- 30 -
TV Menu Features and Functions
Standby Search
(Optional)
If the Standby Search is set to On, when the TV is in standby mode, available
broadcasts will be searched. If the TV locates any new or missing broadcasts,
a menu screen will be displayed, asking you whether or not to execute these
changes. Channel list will be updated and changed after this process.
Store Mode
If you are displaying the TV in a store, you can activate this mode. Whilst
Store
Mode is enabled, some items in the TV menu may not be available.
BISS Key
Biss is a satellite signal scrambling system that is used for some broadcasts. If you need
to enter BISS key on a broadcast, you can use Biss Key setting located in the Other
Settings menu. Highlight Biss Key and press OK to enter keys on the desired broadcast.
Power Up Mode
This setting configures the power up mode preference.
Install and Retune Menu Contents
M7 Operator
This item is named according to the M7 operator in your country. Press OK to
start easy installation.
Automatic Channel
Scan (Retune)
(If available)
Displays automatic tuning options. Digital Aerial: Searches and stores
aerial DVB stations. Digital Cable: Searches and stores cable DVB stations.
Analogue: Searches and stores analogue stations. Digital Aerial & Analogue:
Searches and stores aerial DVB and analogue stations. Digital Cable &
Analogue: Searches and stores cable DVB and analogue stations.
Satellite: Searches and stores satellite stations
Manual Channel Scan
This feature can be used for direct broadcast entry.
Network Channel
Scan
Searches for the linked channels in the broadcast system.
Analogue Fine Tune
You can use this setting for fine tuning analogue channels. This feature is not
available if no analogue channels are stored.
First Time Installation
Deletes all stored channels and settings, resets TV to factory settings.
General TV Operation
Using the Channel List
The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active
stations to be listed by using the Channel List options.
Note:
The commands
Move
,
Delete
and
Edit
name
in the
Edit Channel List
menu are not available for channels that are
being broadcasted from a M7 operator.
Configuring Parental Settings
To prohibit viewing of certain programmes, channels and menus can be locked by using the parental control system.
To display parental lock menu options, the PIN number should be entered. The factory default PIN number is
0000
. After coding the correct PIN number, parental settings menu will be displayed.
Menu Lock
: Menu lock setting enables or disables the menu access.
Maturity Lock
: When set, this option gets the maturity information from the broadcast and if this maturity level
is disabled, disables access to the broadcast.
Child Lock
: When Child Lock is set, the TV can only be controlled by the remote control. In this case the
control panel buttons will not work.
Set PIN
: Defines a new PIN number.
Default PIN code can change depending on the selected country.
If you are asked to enter a PIN code for viewing a menu option, use one of the following codes:
4725
,
0000
or
1234
.
