16
Linking the Watch to your Computer
Use PC mode to connect the watch to your computer through the USB PCdock. Once the watch has successfully linked
with the PCdock, the blue LED light on the PCdock will begin to flash slowly. You can then proceed to upload new workouts
to the watch or download run / workout statistics to your computer. Follow steps through to link the watch
to your computer.
Repeat this step until
you get a successful link.
Scroll to
PC mode
See page 2 Installing Drivers, Software and USB PCdock
to ensure the PCdock is properly attached to your computer.
The watch will automatically try to detect
the digital ID of the HRM chest strap and
the SDM pod. Once detected or after 2-3
minutes of inactivity, the watch will
enter TIME mode.
4
Watch will begin
to link with the PCdock.
Failed Link
Successful Link
4 SEC
