DIAL GAUGE
Dial Indicator / Comparator
PROFESSIONAL
Model No.
User Manual
DI-10KD
DI-10
DI-1058
WDI-0158SP
WDI-0558SP
WDI-1058SP
■
APPLICATIONS
■
PART IDENTIFICATION, FUNCTION
※
Model DI-10 shown
・
Comparing parts to a master part during inspection
・
Measuring machine tools positioning accuracy
・
Measuring runout for rotary shafts
・
Checking vise parallelism on milling machines
・
Measuring flatness of surfaces and assemblies
・
Confirming machine tool feed distance
Thank you for purchasing the Niigata Seiki Dial Gauge.
Used with a Magnetic Base or Indicator Stand, this gauge will show the difference in height or position
relative to a zero point set at a reference position.
●
For safe and proper use of this product, please read this
instruction manual before use and follow the procedures
described. Please keep manual where it is accessible to
user for future reference.
●
Keep this manual with the instrument if transferred or
leased to a third party.
●
For inquiries about this product, please contact dealer or
Niigata Seiki at the address listed on the following page.
①
Limit Markers
For marking acceptance
range for Pass/Fail testing
②
Pointer (Needle)
Shows measurement on Main
Scale
③
Main Scale
Main Scale, rotate Bezel (
⑩
)
to turn
④
Bezel Clamp Screw Clamps Scale to prevent
rotation
⑤
Revolution Counter Pointer indicates Main Scale
×
100
⑥
Rev. Counter Scale Each division is Main Scale
×
100
⑦
Stem
For holding and mounting
Gauge
⑧
Spindle
Shaft moves up and down
with measurement
⑨
Contact Point
Probe which contacts
workpiece
⑩
Bezel
Rotate to turn Main Scale (
③
)
⑪
Flat Rear Plate
Standard back cover
⑫
Lug
Alternate mounting point
⑬
Mounting Hole
For mounting Gauge
⑭
Rear Plate with Lug Accessory back cover for
mounting Gauge using Lug
⑨
Contact Point (Probe)
⑧
Spindle
⑦
Stem
②
Pointer
(Needle)
④
Bezel Clamp
Screw
⑩
Bezel
(
φ
8
ｍｍ
)
⑪
Flat Rear Plate
①
Limit Markers
③
Main Scale
(Indicator Face)
⑥
Rev. Counter
Scale
⑤
Revolution
Counter
⑫
Lug
⑬
Mounting
Hole
(
φ
6. 5mm)
⑭
Rear Plate
with Lug
※
To Use the Rear Plate with
Lug, unscrew the Standard Flat
Rear Plate screws, replace,
and use screws to secure.
[Accessories]
…………
……
……………
…
…
…
………………………
……………………
…………
………………………
…………
…………………………
…………
…
SAFETY NOTIFICATIONS
Throughout this manual,
“
”
symbol indicates
RISK OF PERSONAL INJURY OR PROPERTY
DAMAGE if not followed.
The
“
”
symbol indicates something which is
PROHIBITED, and the
“
”
symbol Indicates
REQUIRED step or necessary condition.
