Precision Measuring Instrument
DIGITAL S-LINE HEIGHT GAUGE
Thank you for purchasing the DIGITAL S-LINE HEIGHT GAUGE.
This precision measuring instrument is for use on a surface plate to measure the height of a feature, or to scribe a workpiece.
●
●
For safe and proper use, please read this instruction manual before
use and follow the procedures described.
Please keep manual where it is accessible to user for future reference.
Keep this manual with the instrument if transferred or leased to a third party.
For inquiries about this product, please contact the dealer where
purchased, or Niigata Seiki.
PROFESSIONAL
DHG-35M
DHG-60M
Model
No.
Instruction Manual
①
Post · · · · · · · · · · · · · · · · · · · · · ·
Slide · · · · · · · · · · · · · · · · · · · · · ·
Fine Adjust Carriage · · · · ·
Base Reference Surface · · ·
Fine Adjust Lock Screw · · ·
Slide Handwheel · · · · · · · · · ·
Slide Clamp · · · · · · · · · · · · · · ·
Battery Cover · · · · · · · · · · · · ·
LCD Display · · · · · · · · · · · · · · ·
[ON/0-ABS] Button · · · · · · · ·
Lock Button · · · · · · · · · · · ·
[PR/SET PR] Button · · · · · ·
Scribe Clamp Screw · · · · · ·
Scribe (w/ Carbide Tip) · · · ·
Data Output Port · · · · · · · · · ·
Fine Adjust Feed · · · · · · · · · ·
Jaw · · · · · · · · · · · · · · · · · · · · · · · · ·
Scribe Clamp · · · · · · · · · · · · · ·
Base · · · · · · · · · · · · · · · · · · · · · · ·
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
⑮
⑯
⑰
⑱
⑲
兟
E
●
,
●
10〜40℃
CR2032（
）
DHG-35M
0−350mm
DHG-60M
0−600mm
7㎏
8㎏
0.01mm
±0.04mm
±0.05mm
・CR2032
（
）
※
・
・
傘
備䢢
①
Post
⑦
Slide Clamp
③
Fine Adjust Car.
④
Base Ref. Surface
䣝
ON/0-ABS
䣟䢢
Button
Lock Button
䣝
PR/SET PR
䣟䢢
Btn.
⑭
Scribe
（
w/ Carbide Tip
）
⑲
Base
⑮
Data Output Port
■
PARTS ID & FUNCTION
⑰
Jaw
⑰
Scribe
Clamp
⑬
Scribe
Clamp Screw
・
Use of product other than as described in this manual
may cause accident.
Use only for measuring and scribe work.
・
・
Do not disassemble or modify.
・
Disassembly may damage product or cause accident.
For repair, please contact distributor or place of purchase.
Do not write on instrument with electric engraver.
・
Do not engrave instrument, such as an ID number, with
engraver or electric pen.
Do not clean main body with organic solvents.
・
It may damage product and affect accuracy.
■
䷵
䷶
䷷
兟
D
■
⑱
⑬
●
- RISK OF PERSONAL INJURY OR
PROPERTY DAMAGE if not followed.
- PROHIBITED action.
- REQUIRED step or necessary condition.
SAFETY NOTICES
Please Observe
To prevent harm to yourself or others, and to prevent damage to property,
always follow the procedures marked by the following symbols.
WARNING:
Denotes a prohibition
– You MUST NOT do.
Denotes a requirement
– You MUST do.
SAFETY NOTICES
Indicates risk of personal injury
or property damage if not followed.
Remove Battery from gauge when it will not be used for
an extended period.
Scribe tip is sharp; handle with care.
・
It may cause injury.
Read the manual and follow the directions.
Use and store only in environment meeting the following
conditions:
●
Dry and protected from rain, water, and oils.
●
Protected from direct sunlight.
●
●
●
Location that is not excessively hot.
Not subject strong electric or magnetic fields.
Protected from children and unauthorized users.
Use in places contrary to the above may cause damage to
the product or affect accuracy resulting in accident or injury.
・
Use for any other purpose may damage or wear the
instrument. Improper use may also cause accident.
Handle with care.
・
Do not drop or subject instrument to excessive shock.
Do not place under heavy objects. Improper handling
may cause damage or poor accuracy.
Do not scratch instrument surfaces.
Before use, clean the surface plate, Base underside, and
Scribe Measurement Surface with a wipe or soft cloth.
・
5-3-14, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-33-5522 Fax. : +81-256-33-5518
MAIL [email protected]
URL http://www.niigataseiki.co.jp
●
●
・
『
』
⑯
Fine Adjust
Feed Screw
⑩
⑫
⑪
⑱
⑤
Fine Adj. Lock Scr.
⑨
LCD Display
⑥
Slide
Handwheel
②
Slide
⑧
Battery Cover
Supports the Slide and Display.
Moves up and down with Display.
For precise control of Slide position.
Measurements are to this surface.
Tighten when using Fine Adjust Feed.
For moving the Slide.
Locks Slide position.
Open to access Battery.
Digital display of measurement.
Power ON/OFF; set measurement to zero.
Disables button operation.
Set and recall the Preset Value.
Tighten to secure the Scribe.
Measurement tip, or to scribe workpiece.
Data Transfer Cable connects here.
Turn for fine adjustment.
Scribe mounts here.
Secures the Scribe.
Supports the Height Gauge.
・
Battery may leak if unused for a long time.
●
●
●
●
●
●
１
４
REL
R
e
『
』
①
e r
e a er
r
a e
e a er
er c u
er c
c
e
re
e.
■
u
era
●
S u
「
」
：
ȡ
Ȣ
ȡ
Ȣ
.
●
●
②
er
R
u
a er .
■
er
※
■
①
②
③
※
「
」
：
.
「
」
.
「
」
.
「
」
.
「dir 1」 ：
「dir -1」 ：
S
■
a
e Scr
e
「
」
「 」
：Set the
※
■
①
②
③
「
」
「
」
②
er
e Scr
e
e Scr
e
a
e
fac
u a
re
ace
e
a
.
u
e
a
u
f
er a
a
e
e Scr
e
a
Scre
ecure.
■
①
②
③
re
…
re
…
CR2032（
）
（＋）
・
・
⑥
⑦
⑥
⑦
⑲
※
⑭
⑦
③
⑤
⑭
⑯
⑥
⑭
S
⑱
S
⑰
⑰
⑭
S
⑱
S
①
e
e Scr
e
a
Scre
a
re
e
e
Scr
e.
・
・
「
」
：
「
」
：
「
」
：
「
」
：
「
」
：
u
er a
⑬
Long
Long
Long
Long
Long
Long
Long
３
２
PR
PR
『
』
①
■
●
「
」
：
ȡ
Ȣ
ȡ
Ȣ
●
c u
●
R S
R u
②
■
※
■
u e
ea ure
e
①
ur
er
.
②
u
e S
e
a
e er u a
f r
ar
u
c
e S
e
e
e
e
u
c Scre
.
③
e S
e
a
e a
e
u
ee
r
e Scr
e
c
ac
e Surface
a e.
re
e
R S
R u
e
e
ea ure
e
e
.
.
※
Se
e Scr
e
e
ec e
ea ure a
a e
a
ea ure
e
.
「
」
：
「
」
「
」
「
」
「dir 1」 ：
「dir -1」 ：
■
「
」
「
」
：Set the
.
※
■
ara
e
ea ure
e
①
ur
er
.
②
u
e S
e
a
e er u a
f r
ar
u
c
e S
e
e
e
e
u
c Scre
.
③
Se
e Scr
e
e Refere ce Surface a
re
e
S
u
e
e
ea ure
e
「
.
」
.
「
」
.
ea ure
e
ec r urface
e
ea ure .
②
■
era
e
e
u
ee
①
u
e S
e
a
e er f r ar
u
c
e S
e
e
e
e
u
c Scre .
②
③
e Scr
e ear
e e
re
a
e
e
e
u
c Scre .
u r
e
e
u
e e S c r e
a e f
e
a
u
e
e Scr
e
.
…
…
CR2032（
）
（＋）
・
・
⑥
⑦
⑥
⑦
S
⑲
※
e a e ecure
ur a
e u
e
S
e a
ee .
⑭
Surface
a e
⑦
③
⑤
⑭
⑯
⑥
⑭
⑱
⑰
⑰
⑭
⑱
①
・
・
「
」
：
e
ea ure
e
Scree
「
」
：
.
「
」
：
.
e
u Scree
「
」
：
「
」
：
Re ea e
c
⑬
ea . Surface
Ref. Surface
Long
Long
Long
Long
Long
Long
Long
３
２
DIGITAL S-LINE HEIGHT GAUGE
●
●
DHG-35M
DHG-60M
Model
No.
Instruction Manual
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
⑮
⑯
⑰
⑱
⑲
AFTER USE
兟
STORAGE
SPECIFICATIONS
●
After use, clean measuring surfaces, sliding surfaces, base,
and exterior using a dry cloth and perform rust prevention
treatment.
For rust prevention, lightly apply anti-rust oil.
●
Remove battery if instrument will not be used for a long period
of time.
10
〜
40
℃
CR2032
（
lithium battery
）
DHG-35M
0
−
350mm
DHG-60M
0
−
600mm
~7
㎏
~8
㎏
0.01mm
5 digit LCD
±0.04mm
±0.05mm
・
CR2032
（
lithium battery
）
※
for test
・
Instruction Manual
・
Battery Tool
Error Condition
Corrective Action
傘
Error
備䢢
is displayed on
the LCD.
The Slide was moved too fast;
press the [ON/0-ABS] Button and
retake the measurement.
Model No.
Meas. Range
Resolution
Max. Permissible Error
Display
Mass
Op. Temp. Range
Power
Accessories
①
⑦
③
④
䣝
ON/0-ABS
䣟䢢
Button
Lock Button
䣝
PR/SET PR
䣟䢢
Btn.
⑭
（
）
⑲
⑮
■
⑰
⑰
Jaw
⑬
・
・
・
・
・
・
■
Mounting a Dial Indicator
A dial Indicator (sold separately) can be mounted in place of the
Scribe using an optional Indicator Mounting Arm (also sold
separately.)
䷵
On the Indicator Mounting Arm, loosen the Clamp and
insert the Indicator into the mounting hole and secure
by tightening the Clamp.
䷶
loosen the Scribe Clamp Screw and remove from the
Jaw.
䷷
Insert the Mounting Arm into the Scribe Clamp replace
onto the Jaw. Adjust the amount of overhang, and
tighten the Scribe Clamp Screw to secure.
APPLICATIONS
兟
FEATURES
Measuring and marking workpieces, ideal for tool and die work.
Handwheel for smooth operation.
Digital display for easy reading.
Zero point can be set at any position.
Preset Value can be set and stored.
Auto-off function (Settable to 8, 120 min., disabled)
Indicator Clamp
Dial Indicator
Cover
Data Transfer Cable
D
ata Button
■
Data Output
Connect the optional Data Transfer Cable (DTC-M1) to output
data. To send data, connect the cable and press the Data Button
on the cable.
Connecting the Data Transfer Cable
Using a small screwdriver, remove the Cover and attach the
cable.
⑱
Scribe Clamp
Indicator Mounting Arm
⑬
Scribe Clamp Screw
●
・
●
●
●
●
●
・
・
・
Outside Japan,
Please contact distributor or place of purchase to inquire about calibration services.
To maintain instrument accuracy, periodic calibration is recommended.
Calibration interval necessary to maintain accuracy will vary depending on frequency
and conditions of use. Please follow your company's guidelines and calibrate regularly.
Niigata Seiki Co., Ltd.
5-3-14, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-33-5522 Fax. : +81-256-33-5518
MAIL [email protected]
URL http://www.niigataseiki.co.jp
SERVICE
●
●
If Instrument is not working properly, or if you have any
questions, please contact distributor or place of purchase.
Please note, manufacturer is unable to respond to inquires
or provide service directly. Please contact distributor or place
of purchase.
・
For communication details, please refer to the manual for
the
『
SK-LOG Measuring Instrument Communication
Software
』
, sold separately.
TROUBLESHOOTING
⑯
⑩
⑫
⑪
⑱
⑤
⑨
⑥
②
⑧
・
●
●
●
●
●
●
１
４
