NightWatcher D1 Digital Video Recorder User Manual
40
Video Blind under Hybrid mode(4+2)
Video blind under full digital mode
Set method: refer to chapter 4.3.1. Motion detect
Note
: "Advanced" button is the same as right click.
4.3.3 Video Loss
When the equipment can not obtain the channel video signal, the video loss alarm is turned on and
the linkage function is turned on.
*Same as motion detect function, video loss is different between Hybrid mode & Full digital mode:
Digital channel: not only to enable video loss function at local side, but also to enable the remote device that
was connected. when remote device with video loss, local side will start alarm recording, otherwise this
function is not enable.
Hybrid mode: only need to enable video loss function at local side.
