NightWatcher D1 Digital Video Recorder User Manual
38
Picture 4.6 set the time section
【
Interval
】
Only one alarm signal is turned on even there are several motion detect signals in the set
interval.
【
Alarm output
】
Start the external equipment of corresponding linkage alarm when the motion detect
alarm is turned on.
【
Delay
】
Delay a few moments and stop when the alarm state is turned off. The range is 10~300
seconds.
【
Record channel
】
Choose the recording channel (multiple option supportive). Trigger the video
signal when the alarm is turned on.
Note:
Set in the [recording setup] and perform the linkage recording. Start detecting video files
in the corresponding time section.
【
Tour
】
■ means that the selective channel is single window alternate patrol preview. The interval is
set in the [Main Menu]>[System] > [Tour].
【
Snapshot
】
Choose record channels, when alarm happens, system triggers related channels for
snapshot signal.
Note
: For Snapshot activation, please go to set period, detect and alarm enable at Main Menu->
Record->Record configure,
*
Snapshot is only at motion detect under hybrid mode, snapshot shows only analog channel.
【
PTZ Activation
】
Set the PTZ activation when the alarm is turned on.
Note:
PTZ activation is set in the [shortcut menu] >[ PTZ control]. Set the patrol between spots,
trail patrol and so on.
*Hybrid mode, PTZ link to the related PTZ information of analog channel, While digital
