64
)RUJRW<RXU/RFDO3DVVZRUG5HFRUGHU1RW&RQQHFWHGWRWKH
Internet)
IMPORTANT:
If you did not connect your recorder to the Internet during the
initial setup and instead chose to create a local password or if your
UHFRUGHULVRɞLQHIROORZWKHVWHSVEHORZ
1.
With your recorder connected to a TV or monitor, access the Login screen and click
Ȋ)RUJRWSDVVZRUG"ȋ
and follow the on-screen instructions.
2.
Go to
www.no-protect.com
.
3.
If you already created a Night Owl Protect account, simply log in. If not, create an
account.
4.
ΖIWKHGHYLFHLVVKRZLQJ2ɞLQHEXWKDVDOUHDG\EHHQUHJLVWHUHGSURFHHGWRVWHS
If the device has not been registered, click
Ȋ5HJLVWHU1HZ'HYLFHȋ
and follow the
prompts.
5.
Once the device has been added to your My Devices page, click on
Ȋ9LHZ'HWDLOVȋ
followed by
Ȋ5HVHW&RGHȋ
6.
(QWHUWKHGDWHIURPWKH5HVHW3DVVZRUGVFUHHQ79RUPRQLWRUDQGWKHQFOLFN
“Get
&RGHȋ
7.
<RXZLOOEHSURYLGHGDWHPSRUDU\DFFHVVFRGH21/<JRRGIRUKRXUV5HWXUQWR
your TV or monitor and enter this code to gain entry.
NOTE:
The 1st 6 digits of the UID and the date can be found on the Reset
Password screen on your TV or monitor.
NOTE:
If the UID and date you entered into the web portal were not correct, the
temporary access code will not work and you will need to remove the
device and re-register it.
