NIFTYLIFT NL140RKT, Operation Manual

Page: 3 / 43

NIFTY LIFT
INTRODUCTION
DESCRIPTION
The Nifty Lift NL140RKT-HV is a truck mounted
high voltage insulated elevating work platform. The
machine has a maximum working height of 14.0 m
and a maximum working reach of 8.5 m. It is a
slewing, reverse-knuckle telescoping machine.
WARNINGS
Before operating the machine, read and
completely understand this manual and all signs
on the machine. Any missing signs are to be
replaced immediately.
WARNINGS
DO NOT ALTER OR DISABLE LIMIT/SAFETY
SWITCHES OR INTERLOCKS.
THIS MACHINE IS NOT TO BE USED IN WIND
EXCEEDING A SPEED OF 12.5 m/s.
ANY PERSON IN THE ELEVATING BASKET
MUST BE WEARING A SAFETY HARNESS.
DO NOT EXCEED THE 250 kg SAFE WORKING
LOAD IN THE BASKET.
DO NOT EXCEED THE LIMIT OF TWO
PERSONS IN THE BASKET.
DO NOT USE THIS MACHINE AS A CRANE.
DO NOT STAND OUTSIDE THE BASKET.
DO NOT USE LADDERS, PLANKS OR ANY
OTHER DEVICE ON OR IN THE BASKET TO
INCREASE HEIGHT.
DO NOT ANCHOR THE BASKET TO ANY
STRUCTURE.
DO NOT RAISE THE BASKET IF THE MACHINE
IS NOT LEVELLED WITHIN THE 5
o
LIMIT
DISPLAYED ON THE LEVEL BUBBLE.
DO NOT STAND ON THE BASKET STEPS OR
RIM. ALL LOADS SHOULD BE PLACED ON THE
BASKET FLOOR.
DO NOT USE THE EMERGENCY BASE
CONTROLS UNLESS THERE IS AN
EMERGENCY SITUATION.
OPERATION
OPERATORS CHECKLIST
INSPECT AND/OR TEST THE FOLLOWING
DAILY OR AT THE BEGINNING OF EACH
SHIFT.
General:
Check:
1.
Operating and emergency controls: Check
that all controls and emergency stops are in
working order.
2. Harness attachment point and CDD’s:
Check that the D-ring harness attachment
points and the CDD’s are present and free
from defects and that the bolts are tight.
3. Hydraulic and systems for leaks.
4. Cables and wiring harnesses.
5. Loose or missing parts.
6. Loose, damaged or missing covers
7. Control signs.
8. Hydraulic reservoir level: Check the level of
the hydraulic fluid in the reservoir with the
boom stowed, stabiliser legs retracted and the
accumulator discharged.
9. Machine for damage or wear.
24.00.20