Height Rider/SP Series
Operating & Safety Instructions
English/USA – 07/17
Original instructions
15
3.3
PRE-OPERATIONAL SAFETY CHECK SCHEDULES
Before use each day and at the beginning of each shift the aerial platform shall be given a visual
inspection and functional test including, but not limited to, the following:
It is recommended that these
be performed at regular intervals as indicated on each checklist.
3.3.1
DAILY SAFETY CHECKS
1)
Check that all labels (decals) are in place and legible
2)
Visually inspect the machine for damaged or loose components.
3)
Check that batteries are charged (Refer to Section 4.6 for further information).
4)
Check the fuel level (if applicable).
5)
Check that canopies/covers and guards are in place and secure.
6)
Check that the boom rest switch is operable
7)
Check that control levers are secure and operate freely.
8)
Check that operating buttons and emergency stop buttons function correctly.
9)
Check the operation of the manual hand pump.
10)
Visually inspect all hydraulic hoses and fittings for damage or leaks.
11)
Check that the platform pivot pins and their tag bolts are secure.
12)
Check that the tilt alarm is functioning correctly (On a slope of 4
0
or more the alarm should sound
and drive should be disabled).
13)
Check the operation of SiOPS (Refer to Section 4.3.6).
14)
Check the operation of the cage weigh system.
3.3.2
WEEKLY SAFETY CHECKS
1)
Inspect tyres and wheels for damage and wear.
2)
Check that the joystick manipulators are secure.
3)
Check hydraulic oil level, ISO Grade 22 (Europe), Grade 32 (Rest of World).
4)
Check engine coolant level.
Caution
, the cooling system is pressurised, so allow engine to cool
sufficiently before removing filler cap.
5)
Inspect the engine air filter and clean or replace if necessary.
6)
Inspect hose track for damage or missing parts.
Summary of Contents for HR21 4x4
Page 79: ......
