HR Series
Operating & Safety Instructions
English/USA – 11/06
38
If this function is not used, the next time the machine drives under power, the same discharge will
occur, allowing the machine to re-set its own brake system.
For safety, the machine should not be left with the brakes bypassed. If the machine is to be left with
the brakes bypassed and the wheels chocked, suitable placards should be attached to the machine to
warn operators of this condition.
FOLLOWING AN EMERGENCY DESCENT RECOVERY OF THE PLATFORM,
FULLY EXTEND AND RETRACT ALL CYLINDERS FROM GROUND CONTROL
STATION BEFORE USING THE MACHINE.
5.7 INCIDENT
NOTIFICATION
It is a mandatory requirement that any accident or incident involving a Niftylift, regardless of whether
any party received injury or property was damaged is reported by telephone directly to Niftylift. Failure
to do so may render any warranty on the machine void..
6 Responsibilities
6.1
CHANGES IN OWNERSHIP
When a change of ownership of a Niftylift occurs, it shall be the responsibility of the seller to notify
Niftylift direct of the unit, model and serial number and the name and address of the new owner within
60 days. This important step is required so that all future Technical Bulletins are able to reach the
registered owner of each machine without delay. Please note warranties are not transferable.
6.2 MANUAL
OF
RESPONSIBILITIES
You are required by ANSI/SIA 92.2 1990, to read and understand your responsibilities before you use
or operate this aerial platform. Please read the enclosed document, as failure to do so could result in
death or serious injury. Wherever any contradiction may appear, the Manual of Responsibilities shall
take precedence over all other documents.
Summary of Contents for HR15
Page 2: ......
