background image

 HR Series 

Operating & Safety Instructions 

 
English/USA – 11/06 

2.1.24

 

The operator shall immediately report to his supervisor any potentially hazardous location(s) 
(environment) which become evident during operation. 

2.1.25

 

If an operator encounters any suspected malfunction of the Niftylift or any hazard or potentially unsafe 
condition relating to capacity, intended use or safe operation, he shall cease operation of the Niftylift 
and request further information as to safe operation from his management, or owner, dealer or 
manufacturer before further operation of the Niftylift. 

2.1.26

 

The operator shall immediately report to his superior any problems or malfunctions of the Niftylift, 
which becomes evident during operation.  Any problems or malfunctions that affect the safety of 
operation shall be repaired prior to continued use. 

2.1.27

 

The boom and platform of the Niftylift shall not be used to jack the wheels off the ground. 

2.1.28

 

The Niftylift shall not be used as a crane. 

2.1.29

 

The Niftylift shall not be positioned against another object to steady the platform.

 

2.1.30

 

Care should be taken to prevent rope, electric cords and hoses from becoming entangled in the aerial 
platform. 

2.1.31

 

Batteries shall be recharged in a well-ventilated area free of flame, sparks or other hazards, which may 
cause explosion.  Highly explosive hydrogen gas is produced during the charging process. 

2.1.32

 

When checking electrolyte levels great care should be taken to protect eyes, skin and clothing. Battery 
acid is highly corrosive and protective glasses and clothing is recommended. 

2.1.33 

If the platform or elevating assembly becomes caught, snagged or otherwise prevented from normal 
motion by adjacent structure or other obstacles, such that control reversal does not free the platform, 
all personnel shall be removed from the platform safely before attempts are made to free the platform 
using ground controls. 

2.1.34

 

When the machine is not in use always stow the booms correctly. 

NEVER LEAVE THE KEYS IN THE MACHINE

,

 if it is to be left for any 

period of time. Use wheel chocks if leaving on an incline. 

 

2.1.35

 

The engine must be shut down while fuel tanks are being filled. Fuelling must be done in a well-
ventilated area free of flame, sparks or any other hazard that may cause fire or explosion. 

PETROL 

(GASOLINE), LIQUID PROPANE AND DIESEL FUELS ARE FLAMMABLE. 

2.1.36  

NEVER START THE NIFTYLIFT IF YOU SMELL PETROL (GASOLINE), LIQUID 
PROPANE OR DIESEL FUEL.  THESE FUELS ARE HIGHLY FLAMMABLE 

 

2.1.37

 

The operator shall implement means provided to protect against use by unauthorised persons. 

2.1.38

 

Never remove anything that may affect the stability of the machine such as, but not limited to, 
batteries, covers, engines, tyres or ballast. 

Summary of Contents for HR15











































Reviews: