SD Series
Operating & Safety Instructions
USA 03/12
14
3.3.3
MONTHLY SAFETY CHECKS
1)
Check the engine oil level (if applicable).
2)
Check the wheel nuts (torque 65ft lbs / 86Nm).
3)
Check outriggers for condition, security and operation.
4)
Check that the boom rotate worm is secure and correctly in mesh. Clean and re-grease.
5)
Inspect brakes for operation and wear.
6)
Grease the knuckle and centre post.
7)
Inspect the engine fuel tank for damage or leaks.
8)
Check telescopic boom wear pads and nylon studs (if applicable).
9)
Lightly oil the jack pad ball joints.
10)
Check that the bolts holding the wheel motors to the chassis are secure.
3.3.4
ANNUAL SAFETY CHECKS
1)
Check that all pivot pins and their tag bolts are secure.
2)
Inspect for any cracks or badly rusted areas on booms and chassis.
3)
Change the hydraulic oil filters.
4)
Inspect the suspension on each rear axle unit.
5)
Check that boom rotate ringbolts are secure (torque 155ft lbs. 210Nm).
