NIETHAMMER
HPZ 112 D and HPZ 115 D
Niethammer HPZ 112 D and HPZ 115 D Page 5
Operation with Color Scrollers
Color Scroller can be used with a special adapter or mounted directly to the luminaire instead of the Filter Frame Holder (9).
Be aware, using accessory in the Filter Frame Holder shift the balance point of the luminaire.
Maintenance and Servicing
1.
Zoom Profiler do not need any maintenance. But dust deposits normally are unpreventable, so it is necessary to clean
the optical parts of the luminaire frequently.
Lenses, mirrors and lamp must be clean with a clean and soft cloth soaked with alcohol. Please, don´t use chemical or
other cleansing material. It is forbidden to touch the optical parts bare handed.
The mirror and the aspheric lenses must be changed every 2 to 3 years, to guarantee a maximum light output.
To clean the zoom lenses, please open the door of the front lenses tube (2 screws).
2.
For the Iris, please don´t use fat or oil.
3.
Please check frequently all electrical cables, electrical and mechanical parts of the luminaire. Tighten the screws if
needed. If you are not sure what to do, please contact our service team.
4.
Maintenance and Servicing are the guaranty for a long economic life time and an optimum in light output.
First Time Use
Using the luminaire the first time, do it in the following way:
•
Open the Iris and pull out the beam shapers as far as possible
•
Give full light for app. 15 minutes
•
Close the iris for 1 minute, open it for 5 minutes, close it again for 1 minute , …
•
Same procedure for the shutters
•
Doing this several times, please
