25
INTRODUCTION: Before First Use
2.4
Before First Use
Perform the following operations before using the device for the first time:
“2.4.1 Removing and installing the battery pack”
,
,
“2.4.5 Setting the printer paper”
,
2.4.1
Removing and installing the battery pack
Perform the following to use the battery pack.
1
Remove the handle cover from the main
body.
1)
Hold down
on the handle cover with a fin-
ger.
2)
While holding down
, slide it down to
remove the cover as shown to the right.
2
Install the battery pack with its terminals fac-
ing down as shown to the right.
3
Slide the battery pack to the bottom of the
handle so that it is fixed to the clasps in the
battery holder.
4
Attach the cover.
●
To remove the battery pack, hold down
for
more than a second to turn off the main body, then
perform the above procedure in the reverse order.
Handle cover
A
A
Clasps
Terminals
