Nidek Medical AR-600, Operator'S Manual

Page: 56 / 66

§9
IC CARD SYSTEM (OPTIONAL)
When the AR-600 is equipped with an IC card system
*1
, it can transmit measured results to the
IC card.
There are two ways to transmit data to the IC cards.
A. To transmit data without pressing .
1. Take measurement.
2. Insert the IC card into the slot of Reader/Writer.
Data will be written in the IC card and the card
will eject automatically.
NOTE
• With this procedure, data in the AR-600
will be cleared after data transmission.
B. To transmit data by pressing .
1. Insert the IC card into the slot of Reader/Writer.
2. Take measurement.
3. Press .
Data will be printed out and at the same time written in the card. The card then will come out
automatically.
NOTE
• In this case, data in the AR-600 will not be cleared.
*1 When the AR-600 is equipped with an IC card system, the interface connector on side can
not be used.