Nidek Medical AR-600, Operator'S Manual

Page: 38 / 66

6 - 3
4. Make the desired item number appear on the display panel.
For each press of the start button, the item number increases.
NOTE
• Pressing the start button on the condition that the last number of the mode is shown
makes the first item number of that mode appear again.
5. By pressing or , change the setting.
NOTE
• Refer to the parameter table on the next page for the setting contents.
• The underline indicates the factory setting. (Factory setting may vary according to the
destinations.
6. To finish setting ........................................ Press .
To go on to the date and time setting ...... Press .
NOTE
• The parameter setting will be kept in memory even though the power is cut off due to
an internal battery *1 .
*1 The battery is rechargeable. When you are operating the instrument for the first time after
unpacking or when the instrument has not been operating for a long time (longer than 1 month),
the clock may reset to zero, and the system parameter and comment settings return to factory
settings. In such a case, turn on the power and leave it on for a while to recharge the battery.
The battery needs 24 hours for a full charge. If you are using the instrument 8 hours a day, you
will have to keep the power on for 3 days before the battery is fully charged. Once the battery
is fully charged, the instrument operates normally for daily use.
Rechargeable lithium battery is used in the instrument. When disposing of the battery-mounted
board, follow local governing ordinances and recycling plans regarding disposal or recycling
of device components. (The lithium battery is not user replaceable.)