25
COMMISSIONING
MDX-I/O M2M - Installation and commissioning manual
5340 en - 2017.07 / c
19.61
: DHCP validation
Adjustment range : No (0) or Yes (1)
Factory setting
: No (0)
Format
: 8-bit
This parameter determines whether the
network should be configured manually (via
the drive parameters) or automatically (via the
network DHCP server).
The DHCP server configures the IP address,
the subnet mask and the default gateway.
19.62
: IP address Wip.Xip
Adjustment range : 0 to 255.255
Factory setting
: 192.168
Format
: 32-bit
This parameter defines the MDX-I/O M2M
module’s IP address in the format Wip.Xip.
Yip.Zip. If DHCP is enabled (see
19.61
= 1),
this address is entered automatically by the
DHCP server.
19.63
: IP address Yip.Zip
Adjustment range : 0 to 255.255
Factory setting
: 1.100
Format
: 32-bit
This parameter defines the MDX-I/O M2M
module’s IP address in the format Wip.Xip.
Yip.Zip. If DHCP is enabled (see
19.61
= 1),
this address is entered automatically by the
DHCP server.
19.64
: Subnet mask Wsub.Xsub
Adjustment range : 0 to 255.255
Factory setting
: 255.255
Format
: 32-bit
This parameter defines the subnet mask in
the format Wsub.Xsub.Ysub.Zsub. If DHCP
is enabled (see
19.61
= 1), this address is
entered automatically by the DHCP server.
19.65
: Subnet mask Ysub.Zsub
Adjustment range : 0 to 255.255
Factory setting
: 255.000
Format
: 32-bit
This parameter defines the subnet mask in
the format Wsub.Xsub.Ysub.Zsub. If DHCP
is enabled (see
19.61
= 1), this address is
entered automatically by the DHCP server.
19.66
: Default gateway Wgtw.Xgtw
Adjustment range : 0 to 255.255
Factory setting
: 192.168
Format
: 32-bit
This parameter defines the address and the
gateway in the format Wgtw.Xgtw.Ygtw.Zgtw.
If DHCP is enabled (see
19.61
= 1), this
address is entered automatically by the DHCP
server.
