HG200 - 200 Inverter
INTRODUCTION
Before using the hoist, read these instructions
carefully and become familiar with the safety
symbols. The handbook must always be kept
together with the machine.
The contents of this use and maintenance
manual conforms with EEC Machine Directive
89/392 and subsequent amendments. As the
manufacturer, TEA reserves the right to make
changes without prior notice and without being
subject to any sanctions,
and also without
affecting the commitment to respect the
main safety technical characteristics
.
The symbol
represents a warning and
indicates that the instructions must be carried
out to prevent personal injury. Non-
compliance with such instructions may lead to
personal injury which, in some cases, may also
be very serious.
WARRANTY
The company pledges, for 12 months from the
hoist delivery date, to replace any defective
parts, at no charge, provided that, based on an
inspection performed by the technical centre, it
is evident that the buyer has used the machine
correctly, has complied with the use and
maintenance standards contained in this
manual and has not tampered or made changes
to the machine.
The electric parts and the steel cable are
excluded from the warranty.
For any repairs under warranty, the machine
must be delivered, at the user's care and
expense, to a TEA authorised service centre.
The manufacturer will not be responsible
for any other damage, including the damage
as a result of the non-use of the hoist.
PACKING AND TRANSPORT
The hoist is supplied packed in a special
plastic bag.
The overall weight of the packed machine
is:
53 Kg (HG200)
58 KG (HG200 INVERTER)
At the time of purchase, the buyer must
check that the machine is undamaged and
includes all the necessary accessories (tie
rod, clamps, instruction manual, conformity
declaration, warranty certificate).
The device must be handled with care using
appropriate equipment and avoiding any type
of impact.
In any case, the machine must be transported
by two persons.
Before handling the device, the user must
first check that:
a) the cable is completed wound on the drum
and the hook is attached to the machine
structure
b) the power supply outlet is disconnected.
MACHINE DECRIPTION
HG 200 SINGLE-PHASE HOIST WITH
MAXIMUM CAPACITY 200 KG.
The hoist has been designed and built
to lift objects, materials or goods.
It is
absolutely prohibited to use the machine to
lift persons and/or animals
.
CONSTRUCTION FEATURES
The hoist is equipped with an asynchronous,
self-braking motor with a disk brake that is
normally blocked by a adequately sized
tension springs.
It is also designed and built by TEA.
The hoist also includes a compact cascade
reduction unit.
English
Pag 1
