-29-
Available to output one measuring data to the device (printer) provided Mitutoyo Digimatic communication.
When the peak or hold mode are ON, just one hold data is outputted.
*In function setting: f06, need to set "dig". And then, start Digimatic communication.
If setting is "Ser", you cannot communicate with Digimatic.
*Please make the connector to meet the device.
Signal connector
FGV-
o
:
Cable for the signal connector
(option)
8. Signal Connector
8.1. Pin assignment
8.2. Mitutoyo Digimatic Output
Pin number
Signal name
1
REQ signal
Digimatic
2
READY signal
3
CLK signal
4
DATA signal
5
Comparator upper limit output
Comparator
6
Comparator OK output
7
Comparator lower limit output
8
ZERO signal input
Input signal
9
HOLD signal input
10
PEAK signal input
11
Common for comparator output
12
GND
The device (printer) provided
for Mitutoyo Digimatic
*Please purchase the optional
special cable when using the
signal connector.
Doing comparator output.
• I/F circuit diagram
8.3 Comparator output
• Comparator output
When a comparator max output is ON, the photo coupler of PC3 is turned on and current flows.
When a comparator OK output is ON, the photo coupler of PC4 is turned on and current flows.
When a comparator min output is ON, the photo coupler of PC5 is turned on and current flows.
Please refer to "5.5. Comparator" for the details (the setting method of comparator upper
limit and a lower limit, the judgment conditions of a comparator) of a comparator function.
Comparator max output
Comparator OK output
Comparator Min output
Common
Summary of Contents for FGV-HXY
Page 34: ...33...
